WHEELS MAVIC XA PRO CARBON 29 BOOST XD

Mavic Xa Pro carbon 29 boost XD 2.35. Product code: P8548110. The Mavic XA Pro Carbon 29 Wheel is significantly lighter than any aluminium wheel, but also laterally stiffer, yet still as impact resistant and with a decent vertical compliance, so that you can step on the power downhill with total confidence. To achieve this, Mavic pushed their exclusive Finite Element Simulation software to the limit to find a carbon lay up that would best balance light weight, impact resistance, lateral stiffness and vertical compliance in the rim. Trail riding is all about saving energy on the climbs so you can enjoy the descents even more. And, when well designed, carbon wheels can perform brilliantly at both. However, we’ve heard plenty of feedback from riders that carbon wheels can often perform badly in vertical compliance, which translates into difficult steering and loss of traction and control. Mavic wanted the XA Pro Carbon to work with the most commonly used trail tire width (2.3 to 2.4), they established that a 26mm hookless rim profile would deliver the best performance. It’s fully UST Tubeless compliant, for improved traction, flat resistance and ease of use. Complete with specifically designed rim tape to seal the rim. The unique Mavic wheel system allowed for fine-tuning to the lacing, ensuring it better complements the rim characteristics. Firstly, Mavic made the rim asymmetric to better balance spoke tension, they also decided to use 24 double butted steel spokes, crossed three on both sides, front and rear, to once again find the sweet spot between lateral stiffness and vertical compliance. At only 1490g in 27.5'' and 1535g in 29'', the XA Pro Carbon leads the category in terms of weight so is ideal for even the most demanding riders. Mavic XA Pro Carbon 29 Features Dynamic with the best balance of lateral stiffness and vertical compliance Light and strong Optimised ground interface Mavic XA Pro Carbon Key Technologies ITS-4 X-MIX QRM+ UST Tubeless Ready Guard+ Dimension 29": 2.35 UST Tubeless Ready INTENDED USE ASTM CATEGORY 3 : offroad with jumps less than 61cm For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels don't exceed 120kg, bike included Recommended tyre sizes: 35 mm to 69 mm (1.4" to 2.7") VERSIONS Color: Black only Disc standard : 6 Bolts only Hub width : Boost (front 110, rear 148) COMPATIBILITY Freewheel: Shimano/Sram, convertible to XD with optional driver body Front axle: convertible from 15mm thru axle to Quick Release with included adapters Rear axle: 12mm thru axle, convertible to Quick Release with optional adapaters RIMS Drilling: traditional Material: 100% Unidirectional carbon fiber ETRTO size 29": 622x26ss Internal width: 26 mm Hookless profile Use with Mavic Tubeless Tape Tyre: UST Tubeless and tubetype Valve hole diameter: 6.5 mm SPOKES Count: 24 front and rear Lacing: front and rear crossed 2 Material: steel Shape: straight pull, bladed, double butted HUBS Adjustable sealed cartridge bearings Axle material: aluminum Front and rear bodies: aluminum Freewheel: ITS-4 alloy DELIVERED WITH Multifonction adjustment wrench Tubeless rim tape Mavic tyre sealant (rear wheel) Rear 12x142mm adapters BX601 quick releases User guide UST valve and accessories Front QR adapters