JACKET ORBEA HIRU ADV THERMAL DWR

Orbea Hiru ADV Thermal DWR Jacket
ADVANCED THERMAL DWR JACKET
With the Hiru Thermal jacket you can face the coldest days thanks to its warm and soft superroubaix fabric. In addition, water will not be a problem either due to the Event Dvstretch membrane and the additional DWR treatment that will keep you dry. It has a very comfortable and elastic high collar, as well as anatomical double cuffs to facilitate the adjustment of gloves.
SIZING AND FIT
The model in the picture is 178 cm with a 96 cm bust, 80 cm waist and is wearing a size M (Italian fit).
Slim fit jersey. We recommend choosing one size larger than usual.
Waterproof 3/5
Water repellency 5/5
Thermal protection 5/5
Breathability 3/5
Windbreaker 4/5
DETAILS
Anatomical double cuff
Reflective details to improve visibility
DWR treatment
Recommended temperature range
-2º / 6º
COMPOSITION
Main fabric front panel
Outer fabric: 78% polyester, 22% elastane - Inner fabric: 62% polyester, 38% Membrane: 100% polyester
Back
85% polyamide, 15% elastane
Armpits
85% polyamide, 15% elastane
Fist
85% polyamide, 15% elastane
Inside the neck
80% polyamide, 20% elastane
Neck insert
80% polyamide, 20% elastane
Waist
External fabric: 56% polyester, 44% elastane - Internal fabric: 80% polyester, 20% elastane
eVent
Wind resistant and laminated eVent fabrics are specifically designed for cycling. Thanks to Direct Venting ™ permeable technology, they offer wind protection and water resistance without sacrificing breathability. This means that even if the wind is roaring and you're sweating a lot, you won't feel a thing.
EVent DV Stretch membrane
Wind resistance like you've never felt before. Introducing the world's first stretch and wind resistant eVent laminated fabric. How do we do it? It is a combination of eVent high performance membrane technology and ITTTAI's advanced lamination capabilities. The result is a perfect balance between comfortable stretch, wind and water resistance, and breathability.
IT STRETCHES UP TO 50% AND RETURNS ITS ORIGINAL STATE
COMPLETELY WIND RESISTANT WITH A PERMEABILITY OF 0.1 cfm.
18,000 g / m2 / 24h
Fabric care
Washing Instructions for eVent® Outerwear
With periodic washing, technical garments offer optimal performance. Consult and follow the manufacturer's instructions carefully and, before washing, fasten all zippers and closures. Machine wash the garment in hot water (40ºC / 110ºF) and use a high-performance cleaning product, such as Nikwax® Tech Wash, or, if you want to use a conventional liquid detergent, we recommend doing a second rinse to remove any residue of product that may remain on the fabric. Machine dry on low heat to revitalize your garment's durable water repellent (DWR) finish. Do not use fabric softener, bleach or stain removers and never dry clean your garment. We do not recommend using an iron to revitalize the DWR finish, as too high a temperature can cause irreparable damage to the fabric.
Maintenance Instructions for eVent® Outerwear
The fabric of your eVent outerwear may have been treated with a durable water repellent finish (DWR) applied at the factory. DWR acts as an invisible first line of defense in wet conditions and, when working properly, causes moisture to collect in droplets and slide off the surface of the fabric.
DWR finishes degrade over time and sometimes need to be reapplied. The garment will perform at its best if it retains the DWR finish. An easy way to check the DWR finish of your garment is to spray or splash it lightly with water and see if any drops form or if the fabric absorbs it. If the fabric “gets soaked”, it's time to renew the DWR finish. When it's time to reapply the DWR finish, we recommend using a product such as Nikwax® TX Direct Wash-In or TX Direct Spray-On.